LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Maxima S >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> IPDM E/R >> On-Vehicle Repair >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Disconnect battery negative terminal.
  2. Remove the IPDM E/R cover (1) while pressing the pawl (A) at the rear end of the IPDM E/R cover (1).
    Fig 1: Identifying IPDM E/R Cover And Pawl
    G05878925Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Disconnect the harness connectors from the IPDM E/R.
    Fig 2: Identifying IPDM E/R Connectors
    G05878926Courtesy of NISSAN MOTOR CO., U.S.A.
  4. While depressing the tabs (A) remove the IPDM E/R (1) from the vehicle.
Fig 3: Identifying IPDM E/R
G05878927Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals