LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Maxima S >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> Component Diagnosis >> B2556 Push-Button Ignition Switch >> Component Inspection

Component Inspection

  1. CHECK PUSH-BUTTON IGNITION SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect push-button ignition switch harness connector.
    3. Check continuity between push-button ignition switch terminals under the following conditions.
      CONTINUITY REFERENCE CHART

      Push-button ignition switch Condition Continuity
      Terminal
      1 4 Pressed Yes
      Not pressed No
      Fig 1: Checking Continuity Between Push-Button Ignition Switch Terminals Under Conditions
      G05876366Courtesy of NISSAN MOTOR CO., U.S.A.

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace push-button ignition switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals