LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Maxima S >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System >> On-Vehicle Repair >> BCM (Body Control Module) >> Removal and Installation >> Removal

Removal and Installation: Removal

CAUTION: Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".
  1. Remove the combination meter. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the BCM screws (A), and pull out the BCM (1).
  3. Disconnect the BCM connector and remove the BCM (1).
Fig 1: Identifying BCM Connector And BCM Screws
G04889452Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals