LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Cube Krom >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Power Distribution System >> DTC/Circuit Diagnosis >> DTC B2616: Ignition Relay Circuit >> Component Inspection

Component Inspection

  1. CHECK IGNITION RELAY
    1. Turn ignition switch OFF.
    2. Remove ignition relay.
    3. Check the continuity between ignition relay terminals.
    CONTINUITY REFERENCE CHART

    Terminals Condition Continuity
    3 and 5 12 V direct current supply between terminals 1 and 2 Existed
    No current supply Not existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace Ignition relay

    Fig 1: Checking Continuity Between Ignition Relay Terminals
    G04889520Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals