LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Cube Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Power Distribution System >> Removal And Installation >> Push-Button Ignition Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove the switch panel finisher. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect the push-ignition switch (2) fixing pawl using a flat blade screwdriver (A), and then remove NATS antenna amp..
Fig 1: Disconnecting Push-Ignition Switch Fixing Pawl Using Flat Blade Screwdriver
G05917825Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals