LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> 370Z Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine Control System - System Diagnostics And Periodic Maintenance) >> S-Mode Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2010 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK S-MODE SWITCH FUNCTION-I
    NOTE: If DTC UXXXX are displayed, first perform the trouble diagnosis for DTC UXXXX.
    1. Turn ignition switch ON.
    2. Select "M/T SYNCHRO SW" in "DATA MONITOR" mode with CONSULT-III.
    3. Check "M/T SYNCHRO SW" indication under the following conditions.
    MONITOR ITEM CONDITION CHART

    Monitor item Condition Indication
    M/T SYNCHRO SW S-MODE switch Pressed ON
    Released OFF

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Go to "DIAGNOSIS PROCEDURE ".

  2. CHECK S-MODE SWITCH FUNCTION-II

    Check the S-MODE indicator under the following condition.

    S-MODE INDICATOR CONDITION CHART

    Condition S-MODE indicator
    S-MODE switch Press (less than 1 second) Illuminated
    Press (1 second or more) Not illuminated

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals