LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> 350Z Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Control System - Component Testing) >> On-Vehicle Repair >> Intake Valve Timing Control >> Intake Valve Timing Control Position Sensor (LH) >> Removal

Intake Valve Timing Control Position Sensor (LH): Removal

WARNING: This page is about a different car, the 2009 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine room cover using power tool. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove air duct and resonator assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect intake valve timing control position sensor connector (LH).
  4. Remove intake valve timing control position sensor (LH) (1) from Intake valve timing control solenoid valve cover (LH) (3).
    Fig 1: Identifying IVT Control Position Sensor And IVT Control Solenoid Valve Cover (LH)
    G05378612Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals