LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> 350Z Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0643 To P2A03 >> DTC P1564 ASCD Steering Switch >> DTC Confirmation Procedure

DTC Confirmation Procedure

If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

  1. Turn ignition switch ON and wait at least 10 seconds.
  2. Press MAIN switch for at least 10 seconds, then release it and wait at least 10 seconds.
  3. Press CANCEL switch for at least 10 seconds, then release it and wait at least 10 seconds.
  4. Press RESUME/ACCELERATE switch for at least 10 seconds, then release it and wait at least 10 seconds.
  5. Press SET/COAST switch for at least 10 seconds, then release it and wait at least 10 seconds.
  6. Check DTC.
  7. If DTC is detected, go to "DIAGNOSIS PROCEDURE ".
scientia non olet · About LEMON Manuals