LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Versa SL, 4D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P0447 To P0850 >> DTC P0460 Fuel Level Sensor >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait maximum of 2 consecutive minutes.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: CONSULT-II Display - Data Monitor
    G04812423Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals