Special Service Tools

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number (Kent-Moore No.) Tool name		Description
KV10111100 (J-37228) Seal cutter	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing steel oil pan and rear timing chain case
KV10112100 (BT-8653-A) Angle wrench	Courtesy of NISSAN MOTOR CO., U.S.A.	Tightening bolts for bearing cap, cylinder head, etc.
KV10107902 (J-38959) Valve oil seal puller	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing valve oil seal
EM03470000 (J-8037) Piston ring compressor	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing piston assembly into cylinder bore
KV101092S0 (J-26336-B) Valve spring compressor 1 KV10109210 (J-26336-20) Attachment 2 KV10109220 ( - ) 3. KV10109230 Adapter (M8)	Courtesy of NISSAN MOTOR CO., U.S.A.	Disassembling and assembling valve mechanism
WS39930000 ( - ) Tube presser	Courtesy of NISSAN MOTOR CO., U.S.A.	Pressing the tube of liquid gasket
ST16610001 (J-23907) Pilot bushing puller	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing crankshaft pilot bushing
KV11103000 (-) Pulley puller	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing crankshaft pulley
KV991J0050 (J-44626) Air fuel sensor Socket	Courtesy of NISSAN MOTOR CO., U.S.A.	Loosening or tightening air fuel ratio A/F sensor a: 22 mm (0.87 in)
KV10114400 (J-38365) Heated oxygen sensor wrench	Courtesy of NISSAN MOTOR CO., U.S.A.	Loosening or tightening rear heated oxygen sensor a: 22 mm (0.87 in)
KV11105210 (J-44716) Stopper plate	Courtesy of NISSAN MOTOR CO., U.S.A.	Securing drive plate and flywheel
KV10115600 (J-38958) Valve oil seal drift	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing valve oil seal Use side A.  a: 20 (0.79) dia  b: 13 (0.51) dia.  c: 10.3 (0.406) dia  d: 8 (0.31) dia.  e: 10.7 (0.421)  f: 5 (0.20)
KV10115801 ( - ) Oil filter wrench	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing and installing oil filter a: 64.3 mm (2.531 in)