Switch Operation

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

When any door switch is ON (door is opened), ground is supplied

to front room/map lamp assembly terminal 2
to personal lamp 2nd row terminal 2 (with rear map lamps)
to room lamp 2nd row terminal 1
through BCM terminal 63, and
to ignition keyhole illumination terminal 2
through BCM terminal 1.

And power is supplied

through BCM terminal 56
to ignition keyhole illumination terminal 1
to front room/map lamp assembly terminal 1
to vanity lamp LH and RH terminal 1 (if equipped)
to personal lamp 2nd row terminal 1 (with rear map lamps)
to room lamp 2nd row terminal 2
to cargo lamp terminal 2.

When front room/map lamp switch is ON, ground is supplied

to front room/map lamp assembly terminal 3
through grounds M57, M61 and M79.

When vanity lamp (LH and RH) (if equipped) is ON, ground is supplied

to vanity lamp (LH and RH) terminal 2
through grounds B7 and B19.

When personal lamp 2nd row (with rear map lamps) is ON, ground is supplied

to personal lamp 2nd row terminal 3
through grounds M57, M61 and M79.

When room lamp 2nd row is ON, ground is supplied through room lamp case ground.

When cargo lamp switch is ON, ground is supplied through cargo lamp case ground.