LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Ventilation System) >> Removal And Installation >> Intake Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper glove box. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect the intake sensor electrical connector.
    NOTE: The intake sensor is located on the top of the front heater and cooling unit assembly next to the A/C evaporator cover.
  3. Remove the intake sensor from the front heater and cooling unit assembly.
    Fig 1: Identifying Intake Sensor With Front Heater And Cooling Unit Assembly
    G04903481Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals