LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Automatic Transmission) >> DTC P0725 Engine Speed Signal >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON" and select "DATA MONITOR" mode for "A/T" with CONSULT-II.
  2. Start engine and maintain the following conditions for at least 10 consecutive seconds.

    VHCL SPEED SE: 10 km/h (6 MPH) or more 

    ACCELE POSI: More than 1/8 

    Selector lever: "D" position 

  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Identifying CONSULT II Display - SELECT DIAG MODE
    G04899604