LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> Electrical >> Gauges >> Driver Information System >> Combination Meters >> Vehicle Speed Signal Inspection >> With CVT, Without Abs

With CVT, Without Abs

  1. CHECK COMBINATION METER INPUT SIGNAL 
    1. Start engine and select "METER/M&A" on CONSULT-III.
    2. Using "SPEED METER" on "DATA MONITOR", compare the value of "DATA MONITOR" with speedometer pointer of combination meter.

    OK or NG 

    OK: Perform TCM self-diagnosis. Refer to "SELF-DIAGNOSTIC RESULT MODE ".

    NG: Replace combination meter. Refer to "COMBINATION METER ".

scientia non olet · About LEMON Manuals