Power Supply And Ground Circuit
Power is supplied at all times
- Through 10A fuse [No. 19, located in the fuse block (J/B)]
- To combination meter terminal 1.
With the ignition switch in the ON or START position, power is supplied
- Through 10A fuse [No. 14, located in the fuse block (J/B)]
- To combination meter terminal 2.
With the ignition switch in the ACC or ON position, power is supplied
- Through 10A fuse [No. 5, located in the fuse block (J/B)]
- To combination meter terminal 23 (with QR25DE).
Ground is supplied
- To combination meter terminals 3, 21 and 22
- Through grounds M57 and M61.