Removal and Installation: Removal: Installation

Install in the reverse order of removal. Be careful of the following points.

• Before the installation, confirm that the inside and outside slide rails are locked at the same positions.
• Confirm that the slide rail location pin is set to the hole on the floor.

When installing the front seats tighten the drivers seat mounting bolts in the following order.

1. Front inner.
2. Front outer.
3. Rear inner.
4. Rear outer.
   Fig 1: Identifying Front Seat Mounting Bolts Tightening Sequence (Driver Seat)

   Courtesy of NISSAN MOTOR CO., U.S.A.

When installing the front seats tighten the passenger seat mounting bolts in the following order.

1. Front inner.
2. Front outer.
3. Rear inner.
4. Rear outer.
   Fig 2: Identifying Front Seat Mounting Bolts Tightening Sequence (Passenger Seat)

   Courtesy of NISSAN MOTOR CO., U.S.A.