Ignition Relay Malfunction Detection Function
- IPDM E/R monitors status of ignition relay by the voltage at ignition relay contact circuit inside it.
- IPDM E/R judges that the ignition relay is error, if status of the ignition relay and ignition switch ON signal (CAN).
- If the ignition relay cannot turn OFF due to contact seizure, it activates the tail lamp relay and daytime running light relay* for 10 minutes to alert the user to the ignition relay malfunction when the ignition switch is turned OFF.
IPDM E/R MONITORS STATUS
| Detection | IPDM E/R judgment | Operation | |||
|---|---|---|---|---|---|
| Ignition switch ON signal | Ignition relay | ||||
| ON | ON | Ignition relay normal | - | ||
| OFF | OFF | Ignition relay normal | - | ||
| OFF | ON | Ignition relay ON stuck | Turn on the tail lamp relay and daytime running light relay(1) for 10 minutes | ||
| ON | OFF | Ignition relay OFF stuck | Detect DTC "B2099: IGN RELAY OFF" | ||
|
NOTE:
|
|||||