LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Rogue SL, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P0506 To P2A00 (CALIFORNIA) >> P1212 TCS Communication Line >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    TESTING CONDITION: 

    Before performing the following procedure, confirm that battery voltage is more than 10.5V at idle. 

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE
    1. Start engine and let it idle for at least 10 seconds.
    2. Check 1st trip DTC.

    Is 1st trip DTC detected?

    YES: GO TO "DIAGNOSIS PROCEDURE ".

    NO: INSPECTION END

scientia non olet · About LEMON Manuals