LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Rogue SL, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (MEXICO) >> Function Diagnosis [For MEXICO] >> On Board Diagnostic (OBD) System >> Diagnosis Tool Function >> Inspection Procedure

Inspection Procedure

  1. Turn ignition switch OFF.
  2. Connect "GST" to data link connector (1), which is located under LH dash panel.
  3. Turn ignition switch ON.
    Fig 1: Identifying Data Link Connector
    G05369583
  4. Enter the program according to instruction on the screen or in the operation manual.

    (*: Regarding GST screens in this information, sample screens are shown.)

    Fig 2: GST Sample Screens Display
    G05369209
  5. Perform each diagnostic mode according to each service procedure.

    For further information, see the GST Operation Manual of the tool maker. 

    Fig 3: Generic Scan Tool Screen Display - READINESS TESTS
    G04874898
scientia non olet · About LEMON Manuals