LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS U1000 Through P0153 >> DTC P0122, P0123 TP Sensor >> On Board Diagnosis Logic >> Fail-Safe Mode

Fail-Safe Mode

When the malfunction is detected, ECM enters fail-safe mode and the MIL lights up.

FAIL-SAFE MODE

Engine operation condition in fail-safe mode
The ECM controls the electric throttle control actuator in regulating the throttle opening in order for the idle position to be within +10 degrees.
The ECM regulates the opening speed of the throttle valve to be slower than the normal condition.
So, the acceleration will be poor.
scientia non olet · About LEMON Manuals