LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P0444 Through P1168 >> DTC P0550 PSP Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON.
  3. Start engine and let it idle for at least 5 seconds.
  4. Check 1st trip DTC.
  5. If 1st trip DTC is detected, go to Diagnostic Procedure