On Board Diagnosis Logic
DTC DETECTING CONDITION AND POSSIBLE CAUSE
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
P0340
0340
(Bank 1) |
Camshaft position sensor (PHASE) circuit |
- The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
- The cylinder No. signal is not sent to ECM during engine running.
- The cylinder No. signal is not in the normal pattern during engine running.
|
- Harness or connectors (The sensor circuit is open or shorted)
- Camshaft position sensor (PHASE)
- Camshaft (Intake)
- Starter motor (Refer to
"STARTING SYSTEM
".)
- Starting system circuit (Refer to
"STARTING SYSTEM
".)
- Dead (Weak) battery
|
P0345
0345
(Bank 2) |