LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Pathfinder S, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Introduction (VQ40DE) >> Basic Inspection >> Inspection And Adjustment >> Idle Speed and Ignition Timing Check >> Ignition Timing >> Method B

Method B

  1. Remove No. 4 ignition coil.
    Fig 1: Identifying No. 4 Ignition Coil
    G04895330Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Connect No. 4 ignition coil and No. 4 spark plug with suitable high-tension wire as shown, and attach timing light clamp to this wire.
    Fig 2: Identifying Timing Light And No. 4 Ignition Coil Wire
    G04895331Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 3: Connecting Ignition Coil And Spark Plug With High-Tension Wire
    G04894500Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Check ignition timing.
    Fig 4: Identifying Timing Indicator
    G04895324Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals