LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Maxima SL >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P1148 To P2A03 >> DTC P1211 TCS Control Unit >> DTC Confirmation Procedure

DTC Confirmation Procedure

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 10.5V at idle  .

WITH CONSULT-III 

  1. Turn ignition switch ON.
  2. Start engine and let it idle for at least 60 seconds.
  3. Check 1st trip DTC.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
scientia non olet · About LEMON Manuals