LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Maxima SL >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P0448 To P0850 >> DTC P0605 ECM >> Diagnostic Procedure

Diagnostic Procedure

  1. INSPECTION START 

    WITH CONSULT-III 

    1. Turn ignition switch ON.
    2. Select "SELF DIAG RESULTS" mode with CONSULT-III.
    3. Touch "ERASE".
    4. Perform DTC Confirmation Procedure  .

      See "DTC CONFIRMATION PROCEDURE ."

    5. Is the 1st trip DTC P0605 displayed again?

    With GST 

    1. Turn ignition switch ON.
    2. Select Service $04 with GST.
    3. Perform DTC Confirmation Procedure  .

      See "DTC CONFIRMATION PROCEDURE ."

    4. Is the 1st trip DTC P0605 displayed again?

    Yes or No 

    YES: GO TO 2.

    NO: INSPECTION END 

  2. REPLACE ECM 
    1. Replace ECM.
    2. Perform initialization of NVIS (NATS) system and registration of all NVIS (NATS) ignition key IDs. Refer to "ECM RE-COMMUNICATING FUNCTION ."
    3. Perform "VIN REGISTRATION ."
    4. Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING ."
    5. Perform "THROTTLE VALVE CLOSED POSITION LEARNING ."
    6. Perform "IDLE AIR VOLUME LEARNING ."

      7. >> INSPECTION END 

scientia non olet · About LEMON Manuals