LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Maxima SL >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P0448 To P0850 >> DTC P0460 Fuel Level Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

NOTE: If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
  1. If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON.
  4. Turn ignition switch OFF and wait at least 10 seconds.
  5. Start engine and wait maximum of 2 consecutive minutes.
  6. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "