LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Maxima SL >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System >> BCM (Body Control Module) >> BCM >> Removal And Installation >> Removal

Removal And Installation: Removal

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring the new BCM after installation. Refer to "CONFIGURATION ".
  1. Disconnect the negative battery cable.
  2. Remove the lower driver instrument panel. Refer to "LOWER DRIVER INSTRUMENT PANEL ".
  3. Remove the screws and release the BCM from the steering member.
    Fig 1: Identifying BCM
    G04918160Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Disconnect the harness connectors and remove the BCM.
scientia non olet · About LEMON Manuals