LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Frontier XE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Qr25DE) >> Component Diagnosis >> P1226 TP Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

NOTE: If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 10V at idle  .

With CONSULT-III

  1. Turn ignition switch OFF, wait at least 10 seconds.
  2. Turn ignition switch ON.
  3. Repeat steps  2 and 3 for 32 times.
  4. Check 1st trip DTC.
  5. If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".

With GST

Follow the procedure "With CONSULT-III" above.

scientia non olet · About LEMON Manuals