LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Frontier XE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Qr25DE) >> Component Diagnosis >> Ignition Signal >> Component Inspection >> Condenser-1

Component Inspection: Condenser-1

  1. Turn ignition switch OFF.
  2. Disconnect condenser-1 harness connector.
  3. Check resistance between condenser-1 terminals 1 and 2.

    Resistance: Above 1 MΩ [at 25°C (77°F)] 

    Fig 1: Checking Resistance Between Condenser-1 Terminals 1 And 2
    G04875488Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals