Specifications Index
XTERRA SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Torque | See applicable component figure in MANUAL AIR CONDITIONER article. | ||
| Axle Nut/Hub Nut | |||
| Front Axle Nut | 137 N.m (101 ft. lbs.) | ||
| Wheel Bearing Bolts | 60 N.m (44 ft. lbs.) | ||
| Battery | BATTERY | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Torque | See applicable component figure under BRAKE SYSTEM article. | ||
| Charging | |||
| Generator | GENERATOR | ||
| Torque | See applicable figure in CHARGING SYSTEM . | ||
| Drive Belts | |||
| Adjustment | TENSION ADJUSTMENT | ||
| Belt Routing | CHECKING DRIVE BELTS | ||
| Engine Cooling | |||
| General Service Specifications | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Radiator Cap Pressure | 78-98 kPa (0.8-1.2 kgf/cm2 , 11-14 psi) | ||
| Thermostat R & I | WATER INLET AND THERMOSTAT ASSEMBLY | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Oil Pressure (80 °C (176 °F) | 98 kPa (1.0 kgf/cm2 , 14 psi) @ idle; 294 kPa (3.0 kgf/cm2 , 43 psi) @ 2000 RPM | ||
| Overhaul | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Torque | See applicable component figure in ENGINE MECHANICAL article. | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint" button. | ||
| Flywheel/Flex Plate Torque | |||
| A/T | 88 N.m (65 ft. lbs.) | ||
| M/T | 88 N.m (65 ft. lbs.) | ||
| Fuel System | |||
| Pressure Specification (At idling) | Approximately 350 kPa (3.57 kg/cm2 , 51 psi) | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE CHECK | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | NA | ||
| Ignition Wires (Routing) | NA | ||
| Spark Plug (NGK: DILFR5A-11) | |||
| Gap | 1.1 mm (.043 in.) | ||
| Torque | 24 N.m (18 ft. lbs.) | ||
| Starting | |||
| Starter | STARTER | ||
| Torque | REMOVAL AND INSTALLATION | ||
| Wheel Alignment | |||
| Adjustment Specifications | |||
| Front | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Rear | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Torque | |||
| Front | See applicable component in FRONT SUSPENSION article. | ||
| Rear | See applicable component in REAR SUSPENSION article. | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 133 N.m (98 ft. lbs.) | ||
| How To Use Nissan/Infiniti Service Information | |||
| Includes: Standard Bolt Torque Symbol Identification General Connector Info |
GENERAL INFORMATION | ||