Procedure After Replacing ECM
WARNING: This page is about a different car, the 2007 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
When replacing ECM, the following procedure must be performed.
- Perform initialization of NVIS (NATS) system and registration of all NVIS (NATS) ignition key IDs. Refer to , "ECM RE-COMMUNICATING FUNCTION ".
- Perform , "VIN REGISTRATION ".
- Perform , "ACCELERATOR PEDAL RELEASED POSITION LEARNING ".
- Perform , "THROTTLE VALVE CLOSED POSITION LEARNING ".
- Perform , "IDLE AIR VOLUME LEARNING ".