Stop Lamp Switch

Disconnect stop lamp switch harness connector.

Fig 1: Identifying ASCD Brake Switch And Stop Lamp Switch
Courtesy of NISSAN NORTH AMERICA, INC.

Check continuity between stop lamp switch terminals 1 and 2 under the following conditions.

Fig 2: Checking Harness Continuity Between Stop Lamp Switch Terminals 1 And 2

Courtesy of NISSAN NORTH AMERICA, INC.

CONTINUITY REFERENCE CHART

Conditions	Continuity
Brake pedal: Fully released	Should not exist.
Brake pedal: Slightly depressed	Should exist.

If NG, adjust stop lamp switch installation, refer to "BRAKE PEDAL ", and perform step 2 again.