LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Xterra Off Road, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1550 To P2A03 >> DTC P1572 ASCD Brake Switch >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Start engine (VDC switch OFF).
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Press MAIN switch and make sure that CRUISE indicator lights up.
  4. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    Fig 1: CONSULT-II Display - DATA MONITOR
    G04900667Courtesy of NISSAN NORTH AMERICA, INC.
    VEHICLE SPEED CONDITION CHART

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position

    If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

    If 1st trip DTC is not detected, go to the following step.

  5. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    VEHICLE SPEED CONDITION CHART

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position
    Driving location Depress the brake pedal for more than five seconds so as not to come off from the above-mentioned vehicle speed.
  6. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals