LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> X-Trail SE, Standard >> Repair and Diagnosis >> Transmission >> Transfer Case >> Trouble Diagnosis For System >> AWD Mode Switch >> Component Inspection

Component Inspection

  1. Turn ignition switch "OFF".
  2. Disconnect AWD mode switch harness connector.
  3. Operate AWD mode switch and check continuity between AWD mode switch harness connector terminals.
    CONTINUITY REFERENCE

    Connector Terminal Condition Continuity
    M39 2 - 4 AWD mode switch: AUTO Yes
    Except the above No
    3 - 4 AWD mode switch: LOCK Yes
    Except the above No
    4 - 7 AWD mode switch: 2WD Yes
    Except the above No
    Fig 1: Checking Continuity Between AWD Mode Switch Harness Connector Terminals
    G06154871Courtesy of NISSAN MOTOR CO., U.S.A.
  4. If NG, replace AWD mode switch.
scientia non olet · About LEMON Manuals