LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> X-Trail SE, Standard >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Disassembly and Assembly >> Disassembly >> Adapter Case

Adapter Case

  1. Remove adapter case mounting bolts.
    Fig 1: Locating Adapter Case Mounting Bolts
    G06154928Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Tap adapter case to remove, using a plastic hammer.
    Fig 2: Tapping Adapter Case
    G06154929Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove O-ring.
  4. Remove adapter case oil seal, using a flat-bladed screwdriver.
    CAUTION: Be careful not to damage adapter case.
    Fig 3: Removing Adapter Case Oil Seal
    G06154930Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Tap gear ring bearing adjusting shim from the cutout on adapter case, using a brass rod. Remove gear ring bearing adjusting shim and gear ring bearing outer race.
    Fig 4: Tapping Gear Ring Bearing Adjusting Shim
    G06154931Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Remove oil gutter.
    Fig 5: Identifying Oil Gutter
    G06154932Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Remove drain plug.
scientia non olet · About LEMON Manuals