Symptom 1: Excessive ABS Function Operation Frequency
- CHECK START
Check longitudinal brake force distribution using a brake tester. Refer to "SERVICE DATA AND SPECIFICATIONS (SDS) ".
OK or NG
OK: GO TO 2.
NG:
- Check the following system. If any malfunction is found, repair or replace malfunctioning parts.
- Brake booster. Refer to "BRAKE BOOSTER ".
- Hydraulic line. Refer to "BRAKE PIPING AND HOSE ".
- Front brake caliper. Refer to "FRONT DISC BRAKE ".
- Rear brake caliper. Refer to "REAR DISC BRAKE ".
- CHECK FRONT AND REAR AXLE
Make sure that there is no excessive play in the front and rear axles. Refer to Front: "ON-VEHICLE INSPECTION AND SERVICE ", Rear: "ON-VEHICLE INSPECTION AND SERVICE ".
OK or NG
OK: GO TO 3.
NG: Repair.
- CHECK WHEEL SENSOR AND SENSOR ROTOR
Check wheel sensor and sensor rotor for the following.
- Wheel sensor installation for damage
- Wheel sensor rotor installation for damage
- Wheel sensor connector connection
- Wheel sensor harness inspection
OK or NG
OK: GO TO 4.
NG:
- Replace wheel sensor or sensor rotor.
- Repair harness.
- CHECK ABS WARNING LAMP DISPLAY
Make sure that the ABS warning lamp is turned off after the ignition switch is turned ON or when driving.
OK or NG
OK: Normal
NG: Perform self-diagnosis. Refer to "SELF-DIAGNOSIS ".