LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> X-Trail LE >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Disassembly and Assembly >> Assembly Inspection >> Backlash

Assembly Inspection: Backlash

  1. Install a bolt to companion flange.
  2. Fit a dial indicator onto the bolt.
  3. Measure the circumference backlash of companion flange, and make sure it satisfies the specification below.

    Backlash: 0.13 - 0.19 mm (0.0051 - 0.0075 in) 

    • If measured value is out of the specification, disassemble it to check and adjust each part.
    Fig 1: Measuring Circumference Backlash Of Companion Flange
    G06154894Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals