Checking of A/T Position
- Place selector lever in "P" position, and turn ignition switch ON (engine stop).
- Make sure selector lever can be shifted to other than "P" position when brake pedal is depressed. Also make sure selector lever can be shifted from "P" position only when brake pedal is depressed.
- Move selector lever and check for excessive effort, sticking, noise or rattle.
- Confirm selector lever stops at each position with the feel of engagement when it is moved through all the positions. Check whether or not the actual position selector lever is in matches the position shown in illustration by the shift position indicator and transaxle body.
Courtesy of NISSAN MOTOR CO., U.S.A.
- The method of operating selector lever to individual positions correctly should be as shown in illustration.
- Confirm back-up lamps illuminate only when lever is placed in "R" position. Confirm back-up lamps do not illuminate when selector lever is in "P" or "N" position with selector lever pushed against "R" position.
- Confirm engine can only be started with selector lever in "P" and "N" positions.
- Make sure transaxle is locked completely in "P" position.