LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> X-Trail LE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS U1000 To P0139 >> DTC P0101 MAF Sensor >> DTC Confirmation Procedure >> Procedure For Malfunction A

Procedure For Malfunction A

NOTE: If engine will not start or stops soon, wait at least 10 seconds with engine stopped (Ignition switch ON) instead of running engine at idle speed.

With CONSULT-II 

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Generic Scan Tool - Data Monitor
    G06152384Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Start engine and warm it up to normal operating temperature.
  4. Run engine for at least 10 seconds at idle speed.
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

With GST 

Follow the procedure "With CONSULT-II" above.

scientia non olet · About LEMON Manuals