LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Versa SL, 4D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    CONTINUITY REFERENCE CHART

    Condition Continuity
    Clutch pedal: Fully released. Should exist.
    Clutch pedal: Slightly depressed. Should not exist.
    Fig 1: Checking Continuity Between ASCD Brake Switch Terminals 1 And 2
    G04812497Courtesy of NISSAN NORTH AMERICA, INC.

    If NG, adjust ASCD clutch switch installation, refer to " CLUTCH PEDAL  "  , and perform step  3 again.

scientia non olet · About LEMON Manuals