LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Manual Transmission) >> RS6F52H >> Final Drive >> Disassembly and Assembly >> Assembly

Disassembly and Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Press in differential side bearing (transaxle case side) to differential case using the drifts.
    CAUTION: Replace differential side bearing and differential side bearing outer race as a set.
    Fig 1: Pressing In Differential Side Bearing
    G04889030
  2. Align and install speedometer drive gear onto differential case.
    Fig 2: Aligning Speedometer Drive Gear Onto Differential Case
    G04889031
  3. Press in differential side bearing (clutch housing side) to differential case using the drifts.
    1. Drift [SST: ST30720000 (J-25405)]
    2. Drift [SST: KV38102510 ( - )]
    CAUTION:
    • Never reuse differential side bearing and differential side bearing outer race.
    • Replace differential side bearing and differential side bearing outer race as a set.
    Fig 3: Identifying Differential Side Bearing (Clutch Housing Side)
    G04889032
  4. Install final gear into differential case and tighten final gear mounting bolts to the specified torque. Refer to "FINAL DRIVE COMPONENTS ".
    Fig 4: Locating Differential Case Bolts
    G04889033
scientia non olet · About LEMON Manuals