Removal and Installation: Installation
WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
- For tightening specifications, refer to "COMPONENT ".
- Perform final tightening of bolts and nuts at the strut assembly lower side (rubber bushing) under unladen conditions with tires on level ground. Check wheel alignment. Refer to "WHEEL ALIGNMENT INSPECTION ".
- Check wheel sensor harness for proper connection. Refer to "REMOVAL AND INSTALLATION ".
- Attach strut mounting insulator as shown.