LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R Spec V, RS6F52A >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Continuously Variable Transmission (CVT)) >> DTC U1010 Transmission Control Module (Can) >> DTC Confirmation Procedure >> With Consult-III

With Consult-III

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
  3. Start engine and wait for at least 6 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals