LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Quest Base >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> On-Vehicle Service >> Revolution Sensor Replacement

Revolution Sensor Replacement

  1. Remove intake air duct.
  2. Disconnect electrical connector.
  3. Remove revolution sensor from A/T.
  4. Reinstall any part removed.
    • Do not reuse seal bolt. 
      Fig 1: Locating Revolution Sensor
      G04906220Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals