LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Quest Base >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Key Interlock Cable >> Removal

Key Interlock Cable: Removal

  1. Unlock slider by squeezing lock tabs on slider from adjuster holder.
  2. Remove casing cap from bracket of control device and remove interlock rod from cable.
    Fig 1: Identifying Interlock Rod From Cable
    G04906216Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove holder from key cylinder and remove key interlock cable.
    Fig 2: Identifying Holder From Key Cylinder
    G04906217Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals