LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Quest Base >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Key Interlock Cable >> Installation

Key Interlock Cable: Installation

  1. Set key interlock cable to key cylinder and install holder.
  2. Turn ignition key to lock position.
  3. Set selector lever to P position.
    Fig 1: Identifying Holder From Key Cylinder
    G04906217Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Insert interlock rod into adjuster holder.
  5. Install casing cap to bracket.
  6. Move slider in order to secure adjuster holder to interlock rod.
    Fig 2: Inserting Interlock Rod Into Adjuster Holder
    G04906219Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals