LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Quest Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Driver Information System >> Combination Meters >> CONSULT-II Function (METER) >> Data Monitor >> Operation Procedure

Operation Procedure

  1. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  2. Touch either "MAIN SIGNALS" or "SELECTION FROM MENU" on the "SELECT MONITOR ITEM" screen.
    SIGNALS REFERENCE CHART

    MAIN SIGNALS Monitors main signals.
    SELECTION FROM MENU Selects and monitors individual signal.
  3. Touch "START".
  4. When "SELECTION FROM MENU" is selected, touch individual items to be monitored. When "MAIN SIGNALS" is selected, main items will be monitored.
  5. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".
    Fig 1: CONSULT-II Display - DATA MONITOR
    G04908697Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals