Operation Procedure: Notes

• The BCM only locks/unlocks the doors if the ID number matches. (Remote control entry functions)
• When the keyfob is operated, the signal from the keyfob is sent and the remote keyless entry receiver receives the signal and sends it to the BCM. Only if the ID number matches does the BCM send the open/close signal to the sliding door control unit. (Remote control automatic sliding door function)
• Unless the key is inserted into the ignition key cylinder or one of the doors is opened within 1 minute after the UNLOCK switch on the keyfob is pressed, all the doors are automatically locked. (Auto lock function)
• When a door is locked or unlocked, the vehicle hazard lamps flash and the horn sounds to verify operation. (Active check function)
• When the key is in the ignition key cylinder (when the key switch is ON) and one of the doors is open, the door lock function does not work even when the door lock is operated with the keyfob.
• Keyfob ID set up is available.
• If a keyfob is lost, a new keyfob can be set up. A maximum of 5 IDs can be set up.