LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Pathfinder LE, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> TX15B >> Precautions >> Precautions for Transfer Assembly and Transfer Control Unit Replacement >> Check 4WD Shift Indicator Pattern >> Notes

Check 4WD Shift Indicator Pattern: Notes

  1. Set 4WD shift switch to "2WD", "4H", "4LO", "4H" and "2WD" in order. Stay at each switch position for at least 2 seconds.
  2. Confirm 4WD shift indicator lamp and 4LO indicator lamp are changed properly as follows.
    Fig 1: Identifying 4WD Shift Switch Operation Chart
    G04910363
    • If OK, the position between transfer assembly and transfer control unit is correct.
    • If NG, the position is different between transfer assembly and transfer control unit. Adjust the position between transfer assembly and transfer control unit. Refer to pattern table below.
scientia non olet · About LEMON Manuals