LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Murano SE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1217 To P2A03 >> DTC P2135 TP Sensor >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 1 second.
  4. If DTC is detected, go to , "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals